Industrial health & safety screening in under 2 minutes
USMC is an automated module that performs a quick health and safety screening before workers start their shift. In under 2 minutes it measures temperature, blood pressure, heart rate, alcohol and signs of psychoactive influence through the pupil response, using certified, medical-grade sensors for vital signs.
The system is built for high-risk environments: oil and gas, chemicals, heavy industry, construction, mining, transport and large contractor flows. It helps HSE, security and occupational health teams make sure that only fit-for-duty staff and contractors enter critical areas.
Each worker identifies themselves, follows a simple guided flow, and the module collects all measurements automatically. The software applies clear rule based logic and AI/ML-assisted risk scoring, highlights only abnormal or risky cases and sends alerts and reports to your medical or HSE team. It is screening and early warning, not diagnosis, so final decisions always stay with your clinicians and responsible managers.
Industrial health & safety screening
in under 2 minutes
in under 2 minutes
Purpose
USMC is an automated module that performs a quick health and safety screening before workers start their shift. In under 2 minutes it measures temperature, blood pressure, heart rate, alcohol and signs of psychoactive influence through the pupil response, using certified, medical-grade sensors for vital signs.
The system is built for high-risk environments: oil & gas, chemicals, heavy industry, construction, mining, transport, electricity companies, large contractor flows. It helps HSE, security and occupational health teams make sure that only fit-for-duty staff and contractors enter critical areas.
Each worker identifies themselves, follows a simple guided flow, and the module collects all measurements automatically. The software applies clear rule based logic and AI/ML-assisted risk scoring, highlights only abnormal or risky cases and sends alerts and reports to your medical or HSE team. It is screening and early warning - not diagnosis, so final decisions always stay with your clinicians and responsible managers.
During a pilot project, AI was able to identify two employees whose condition required immediate hospitalization. There were 450 kilometres between us.
Explore further!
- Do you know which of your employees could end up in the hospital tomorrow?
- What is the cost of making a mistake when an employee comes on shift with high blood pressure or signs of intoxication?
- How long does it take to check your employees' health now - and how does that affect productivity?
- Would you want to know about a problem in an employee's health before or after an incident occurred?
- Why are you still relying on a doctor's subjective opinion and paper records?
- Did you know that 70% of workplace accidents are related to employee ill health and could have been prevented?
- Who is liable if an employee with a health impairment makes a mistake?
- Are you ready to take responsibility for the consequences of ignoring early warning signs of health problems?
for non-invasive health screening
Improve the safety and productivity of your employees
for non-invasive health screening
Improve the safety and productivity of your employees
From paper to precision.
Occupational health becomes part of business intelligence.
- Medical checkups are conducted manually, subjective approach, with no systematic
- No trend analysis of personnel health
- Management does not get a clear picture, at best reports after incidents
- People with health risks are missed
- Doctors are overloaded with paperwork, or unavailable
- High cost and duration of basic medical checkups
- Fully automated screenings in less than 2 minutes
- AI analyzes data and identifies risks
- Instant notification of critical deviations
- Full digital transparency and accountability
- Health becomes a real norm, not a formality
it all depends on the checkups intensity
-
IdentificationReliable identification before tests, including photo and video control to eliminate errors and fraud -
You don't need a doctor!It is up to the client to determine the degree of medical involvement - completely without a doctor, remote selectively, or full remote supervision for high-risk businesses -
Flexibility and scalingYou can easily build a system with a single physician center for multiple checkpoints - accessibility and coverage of health care services grows -
Speed. PrecisionNo longer than 200 seconds per test, accompanied by voice and visual prompts and printing of final results on hard copy -
Our software is AI/ML-enhancedThe software organizes the measurements and AI/ML analyzes the data, automatically generates reports, and identifies trends in employee health status, but is not used for diagnosis -
Data securityAll data is encrypted and transmitted only to the client server where the analysis software is located
- 5%AlcoholDräger and analogs / FDA
- 10%Psychoactive influenceDPRL-sensor / 🌐 SENTHORIS
- 0,2 °СTemperatureInfrared sensor / FDA
- 5%BP and pulseAutomatic tonometer / FDA
Our innovations and pragmatic approach reduce risks in
< 2 minutes
< 2 minutes
-
Pulse, blood pressure, temperature, alcohol, drugs, fatigueAll components are certified and are industry-leading - Smart and Fast!Screening time up to 90-200 seconds
- Real-time digitalization and AI/ML analyticsYou see the whole picture and easily make decisions based on reliable information
- Photo and video controlFraud is not possible
- The degree of physician involvement is your choiceThe system can operate autonomously
- 214 +drivers were tested during a pilot project
- 1200 +fully automated medical checkups
- 45%of results showed health deviations
- 75%drivers are predisposed to or have cardiovascular problems
- 3critical cases identified remotely and reported to management
- 50-59high-risk age group identified for further optimization of work shifts
Zero delays in decision-making
Your company now has gotten health data.
But do you have clarity?
When there are hundreds of health screenings every week, who is actually analyzing the results?
What our AI/ML-powered software provides:
- Identifying high-risk employees
- Trends by department, shift and time
- Instant alerts based on outliers or reports on recurring issues
- Predictive health analytics to understand what tomorrow holds for your workforce
No paper reports in a glass cabinet.
No physician time wasted on paperwork because it is not beneficial to health. Just instant reports you can put into practice.
- Staff are healthy and you know where the problems are.
- You make decisions easily - you have the numbers.
- Risks of incidents and major losses are reduced.
- Business grows quietly and steadily.
This is what any business strives for?
Each checkup feeds a system that maps the real-time health landscape of your workforce.
Steps:
- Identification – put your company or personal card to the reader
- Data Capture – pulse, BP, temperature, alcohol, and narcotics via pupil scan
- AI Analysis – detects risks, patterns, and health events
- Instant Summary – employee status, risk groups, analytics
- Actions – easy access to summary information, alerts, and fast reports for decision-making. Send to a specialist, hospitalize, prevent from working, change shift, etc.
AI doesn’t get tired.
Doesn’t miss a symptom.
Doesn’t need a lunch break.
We don’t replace doctors
We give them eyes that see 24/7
USMC doesn’t just scan employees.
It understands the big picture.
It detects when risk increases across a department.
It responds before it’s too late.
It doesn’t wait — it warns.
a long-term strategy
PRESS RELEASE
Burgas, Bulgaria – May 2025
LUKOIL Bulgaria сompletes Digital Health Control Project with 3D HAPPY LTD: A New Standard in Contractor HSE Monitoring!
In a landmark initiative to reinforce workplace safety and streamline health control procedures, 3D HAPPY LTD has successfully completed the implementation of its USMC-S system at LUKOIL Bulgaria. This compact telemedicine module provides an advanced solution for the rapid screening of external contractors and personnel before entering hazardous industrial zones — without disrupting operational flow.
Targeting critical access points with Maximum Efficiency
Enterprises facing the challenge of ensuring physical fitness among third-party contractors during high-risk operations - such as scheduled maintenance shutdowns - now have a fully automated, plug-and-play solution. USMC-S offers rapid screening for body temperature, alcohol levels, and drug influence in under 60 seconds per individual. This ensures that only fit personnel access restricted zones, minimizing health-related risks and liability.
Why this matters
Traditional pre-shift medical inspections are slow, error-prone, and costly - especially for non-permanent personnel. With USMC-S, the screening process becomes:
- Fast: 40-second health checks at the access control zone
- Automatic: No need for medical personnel on site
- Objective: Eliminates subjective human assessments
- Scalable: Can handle dozens of people per hour with zero paper workload
A Scalable Technology with Proven Results
The USMC-S module integrates seamlessly into the current access control infrastructure (if required via API), enabling real-time decision-making before a person reaches the turnstile. It is equipped to measure:
- Pulse rate
- Body temperature
- Breath alcohol
- Pupil reaction to detect narcotic influence
Technical Overview:
- Operation: Autonomous with expandability
- Power: 220V, 50 Hz, grounded
- Power consumption: Up to 100W
- Temperature range: +10°C to +40°C
- Installation: Mounted at or near checkpoint turnstiles
- Protection class: IP54
Setting a Benchmark for the Industry
By introducing USMC-S, LUKOIL has significantly enhanced its occupational health and safety protocols. This system not only raises the bar for industrial risk management but also supports ESG goals by reducing preventable accidents and reinforcing corporate responsibility.
BELIEVE IN
-
Denis Zalynskiy
Engineering Heart
of the company, EU
A leading researcher and technology innovator with extensive experience in project leadership, manufacturing facility development, and product improvement. Dedicated to driving innovation through a scientific approach.
-
Artem Karavatyi
Consulting, analytics,
sales, operations, EU, GCC
A seasoned international advisor guiding top-level executives across diverse enterprises. Possesses a strong strategic vision combined with a pragmatic approach to problem-solving, from initial concept development through successful implementation.
-
Dmitry Tsepkov
Strategy & Business development, EU
A seasoned medical technology professional with a strong track record in sales, company development and international partnerships. Dedicated to identifying opportunities for collaboration that drive innovation and improve healthcare outcomes.
-
Alex Dokuchaev
Production & Customer Service Leader, EU
His entire professional life is tied to equipment, repairs and process improvement, where a painstaking and invisible routine with every detail of the product ensures the harmony of hardware and software. Ready for any challenge.
-
Maxim Zagryadskiy
Head of IT Development
An experienced IT leader with 8+ years in .NET/C# development, system integration, and backend architecture. Skilled in building high-load services and digital platforms for industrial and medical sectors. Focused on turning complex technical challenges into reliable solutions that support business growth and digital transformation.
-
Aleksey Tsepkov
Cybersecurity Leader, EU
CEH-certified cybersecurity leader with 10+ years in information security, risk management, and infrastructure protection. Skilled in building secure architectures and compliance systems for industrial and healthcare sectors. Focused on preventing threats and ensuring reliability through practical, scalable defense solutions.
- Mohammad Youssef
Exclusive MEA Partner, Distributor Relations, USMC
The Anfos Medical LLC company’s leader is an experienced entrepreneur with 20 years in healthcare, including pharmaceuticals, medical devices, and life sciences. Expert in medtech and international partnerships, he builds sustainable links across MEA, promoting strategic growth and effective innovation integration.
R&D, production, sales
3D Happy LTD
8000, Burgas, Bulgaria
Vardar 28 str.
EVERTON LTD
8000, Burgas, Bulgaria
M.Gerdzhikov 21 str., floor 3
zdv@mededteh.com
a.karavatyi@mededteh.com
+359 877 959 778
+359 886 899 089
3D Happy LTD group, Burgas, Bulgaria
All Rights Reserved